| |
常規特色
-
所有 ARINC429
通道同時發揮全部性能,並可針對高/低速比特率進行編程
-
完整的錯誤注入/檢測
-
循環/非循環/FIFO
發送器操作
-
環路/污染模式(接收-修改-重傳)
-
用於捕獲和過濾的標籤選擇性觸發器
-
所有 ARINC429
通道同時 100% 實時錄製和同步重放
-
IRIG-B
時間編碼器/解碼器
-
Linux 和
Windows 驅動程序(包括 LabView VI)
-
嵌入式 Web
服務器和配置應用程序
-
可選的數據總線測試和分析軟件
PBA.pro – 用於航空電子測試和分析應用的 AIM 核心軟件平台
AIM 提供用於測試、分析和仿真應用的 PBA.pro
軟件。PBA.pro兼容Windows和LINUX操作系統,支持大部分AIM接口硬體模組。靈活、可擴展和開放的 PBA.pro 概念支持廣泛的客戶應用。
-
用於模擬和監控流量的圖形可視化的內置功能
-
按時間順序的流量統計分析和消息解析特徵
-
支持基於監控/記錄流量生成BC模擬
-
基於監控/記錄流量的強大導出和後期分析功能
-
導入舊版 PBA-2000
設置和記錄/重放文件
|
4, 8 and 16 Channel , ARINC429 Test and Simulation , Module for Standard
Ethernet
- Full performance on all ARINC429
channels concurrently and programmable for High/Low Speed Bit rates
- Full Error Injection/Detection
- Cyclic/Acyclic/FIFO Transmitter
operation
- Loop/Pollution mode
(Receive-Modify-ReTransmit)
- Label Selective Trigger for
Capture and Filtering
- 100% Real Time Recording and
Synchronised Replay of all ARINC429 channels concurrently
- IRIG-B Time Encoder/Decoder
- Drivers for Linux and Windows
(including LabView VIs)
- Embedded Web Server and
Configuration Application
- Optional Databus Test and
Analysis Software
|
|
Single or Dual Stream MIL-STD-1553 A/B & 4, 8 or 12 Channel ARINC429
Mixed Protocol Test & Simulation Module for Standard Ethernet
- Concurrent BC, MRT (31) &
Chronological Monitor
- Full Error Injection/Detection
- Physical Bus Replay,
Synchronised Replay
- Complex Triggering, Data
Capture/Filtering, 100% Bus Recording
- Full Function, Single Function &
Simulator Only versions available
- 10/100/1000Mbit/s Ethernet Host
Interface
- 8 General Purpose Discretes
- IRIG-B Time Encoder/Decoder
- Drivers for Linux and Windows
(including LabView VIs)
- Embedded Web Server and
Configuration Application
- Optional Databus Test & Analysis
Software
|
|
ANET-MxAy-R: Rugged ANET for MIL-STD-1553/ARINC429
The ANET-MxAy-R is the rugged variant of the ANET-MxAy which is
available in a dedicated rugged housing.
The unit has been tested for:
- Shock, Vibration, Humidity,
Altitude (all MIL-STD-810G)
- EMC (EN 55022: 2011-12, EN 55024
2011-09)
The default power input range is 9…36VDC and therefore compatible to the
28VDC aircraft power.
The I/O connectors are standard type connectors, for the power input
connector a breakout cable is optionally available. |
Applocation Software
|
- Modular, scalable and integrated
Software platform
- Support for Windows and Linux
- Fully automatable and
customizable via Scripts, Remote Control and User Dialogs
- Manage single or multiple AIM
Avionics Interfaces and 3rd party hardware resources within a single
Framework
|
|